I-FCCS07 FeCuCoSn Phambi kweMetal Powde eDityanisiweyo kuMgangatho oPhakathi ukuya kwiZixhobo zeDayimane eziPhezulu

I-FCCS07 FeCuCoSn Phambi kweMetal Powde eDityanisiweyo kuMgangatho oPhakathi ukuya kwiZixhobo zeDayimane eziPhezulu

1. Yintoni iPowder esele ifakwe ngaphambili

Umgubo osele udityaniswe kwangaphambili unzima, awucinezeleki kwaye ngoko ke ufuna imithwalo ecinezelayo ephezulu ukuvelisa ukuxinana okuphezulu.Nangona kunjalo, bayakwazi ukuvelisa izixhobo ezinamandla kakhulu ze-sintered.I-pre-alloying iphinda isetyenziswe xa ukuveliswa kwe-homogeneous material from elemental powders kufuna amaqondo obushushu aphezulu kakhulu kunye namaxesha amade e-sintering.Eyona mizekelo intle ziintsimbi ezingenastainless, ezine-chromium kunye ne-nickel contents kufuneka zifakwe ngaphambili ukuvumela ukuveliswa kwezoqoqosho nge-powder metallurgy.

2. IiParameters zeFCCS07

	Eyona nto	Fe, Cu, Co, Sn
	Uxinaniso lwethiyori	7.84g/cm³
	Ubushushu beSintering	790℃
	Ukugoba Amandla	1500Mpa
	Ukuqina	105-110HRB

3. I-FCCS07 i-Powder Character esele ifakwe ngaphambili

• Umgubo unamandla okumanzisa kwidayimani kunye negranulating enkulu yomatshini kwezinye iipowder zetsimbi, inokunceda iimveliso zifezekise ixabiso elikhulu kwisantya kunye nobomi.
• Ifakwe kumgangatho ophakathi ukuya kumgangatho ophezulu weblade yedayimani yegranite, icwecwe ledayimani ye-ceramic, ucingo lwedayimani kunye neebhithi ezingundoqo zedayimani.

4. Umyalelo wokusetyenziswa kweCeramic Cutting Blade

1. Metal Powder

• 30-50% FCCS07
• + 25-35% Cu
• + 3-6% Sn
• +2-5% Ni
• + 7-10% CUCS
• + Fe yebhalansi

B. Idayimane ye-Dry Cutting Ceramic

• 50/60 @ 30%
• 60/70 @ 40%
• 70/80 @30%
• Ugxininiso lweDayimane @ 13-15%

C. Idayimane yokuSika iCeramic emanzi

• 50/60 @ 60%
• 60/70 @ 40%
• Ugxininiso lweDayimane @ 10-12%

D. Ubushushu beSintering 830-850℃