FCNS03 Fe Cu Ni Sn Pre Alloyed Powder for Ceramic Diamond Blade

FCNS03 Fe Cu Ni Sn Pre Alloyed Powder for Ceramic Diamond Blade

1. Yintoni iPowder esele ifakwe ngaphambili

Umgubo osele udityaniswe kwangaphambili unzima, awucinezeleki kwaye ngoko ke ufuna imithwalo ecinezelayo ephezulu ukuvelisa ukuxinana okuphezulu.Nangona kunjalo, bayakwazi ukuvelisa izixhobo ezinamandla kakhulu ze-sintered.I-pre-alloying iphinda isetyenziswe xa ukuveliswa kwe-homogeneous material from elemental powders kufuna amaqondo obushushu aphezulu kakhulu kunye namaxesha amade e-sintering.Eyona mizekelo intle ziintsimbi ezingenastainless, ezine-chromium kunye ne-nickel contents kufuneka zifakwe ngaphambili ukuvumela ukuveliswa kwezoqoqosho nge-powder metallurgy.

2. IiParameters zeFCNS03

	Eyona nto	Fe, Cu, Ni, Sn
	Uxinaniso lwethiyori	7.98g/cm³
	Ubushushu beSintering	830℃
	Ukugoba Amandla	1150Mpa
	Ukuqina	104-108HRB

3. Umlinganiswa FCNS03

• Isakhiwo seSintered siyafana kwaye sihlangene.isidumbu sinolawulo oluhle lwedayimane, ukuxhathisa okukhulu kokunxiba kunye nokubukhali.
• Umgubo usetyenziswa kumgangatho ophakathi ukuya kwi-high quality diamond blade, ii-ceramic cutting blade.

4. Imiyalelo yokwenza iCeramic Cutting Blade.

1. Ipesenti yentsimbi:

• (30-50)% FCNS03
• + (25-35)% Cu
• + (5-8)% Sn
• + (2-4)% Ni
• + Fe yeBlance

B. Ubungakanani beDayimane yeGrit kunye nepesenti:

• 50/60 @ 30%
• 60/70 @ 40%
• 70/80 @ 30%

• Ugxininiso: (9-12)%

C. Sintering lobushushu: 840-860 ℃