I-FCC58 FeCoCu Pre Alloyed Metal Powder For High Quality Diamond Tools

I-FCC58 FeCoCu Pre Alloyed Metal Powder For High Quality Diamond Tools

1. Yintoni iPowder esele ifakwe ngaphambili

Umgubo osele udityaniswe kwangaphambili unzima, awucinezeleki kwaye ngoko ke ufuna imithwalo ecinezelayo ephezulu ukuvelisa ukuxinana okuphezulu.Nangona kunjalo, bayakwazi ukuvelisa izixhobo ezinamandla kakhulu ze-sintered.I-pre-alloying iphinda isetyenziswe xa ukuveliswa kwe-homogeneous material from elemental powders kufuna amaqondo obushushu aphezulu kakhulu kunye namaxesha amade e-sintering.Eyona mizekelo intle ziintsimbi ezingenastainless, ezine-chromium kunye ne-nickel contents kufuneka zifakwe ngaphambili ukuvumela ukuveliswa kwezoqoqosho nge-powder metallurgy.

2. IiParameters zeFCC58

	Eyona nto	Fe, Co, Cu
	Uxinaniso lwethiyori	8.58g/cm³
	Ubushushu beSintering	850℃
	Ukugoba Amandla	1400Mpa
	Ukuqina	98-102HRB

3. I-FCC58 i-Powder Character efakwe ngaphambili

• Umgubo unamandla okumanzisa kwidayimani kunye negranulating enkulu yomatshini kwezinye iintsimbi zetsimbi, ibhondi inokuqina okuphezulu, ukumelana nefuthe elinamandla.
• Ingasetyenziselwa izixhobo zedayimani ezikumgangatho ophezulu weproduciton, ezinje ngocingo lwedayimani, iibhithi ezingundoqo zedayimani, i-granite ekumgangatho ophezulu, iblade yokusika i-ceramic.

4. Umyalelo wokusetyenziswa kwiBlade yokusika iCeramic ekumgangatho oPhezulu

1. Metal Powder

• 30-50% FCC58
• + 3-8% Ni
• + 25-35% Cu
• + 5-8% Sn
• + Fe yebhalansi

B. Idayimani

• 50/60 @ 30%
• 60/70 @ 40%
• 70/80 @30%
• Ugxininiso lweDayimane @ 9-12%

C. Ubushushu beSintering 840-860℃